Angelcare® Movement Sensor with Sound Monitor

Product Information

"Stop worrying while your baby sleeps in her crib!"

Our Movement Sensor with Sound Monitor detects your baby's slightest movements, even while she sleeps. While it may seem that your baby is perfectly still when she is sleeping, she really isn't. An alarm will sound alerting you to check your baby only if she becomes absolutely still for 20 seconds and no movement whatsoever is detected.

The under-the-mattress Sensor Pad detects your baby's slightest movements. If your baby goes absolutely still for 20 seconds, the Sensor Pad sends a signal to the Nursery Unit which sounds an alarm alerting you to check your baby. If you are out of the baby's room, the portable Parents' Unit (Sound Monitor) will pick up the alarm as well as other nursery sounds. In addition, the Nursery Unit has an optional "tic" feature. If the Sensor Pad senses movement, the Nursery Unit will continuously tick. If it doesn't, the ticking will stop.

Your crib must have a hard flat surface. If it does not, just place a piece of masonite or a board under the mattress and place the Sensor Pad on top of the masonite and under the mattress. Be sure to place the correct side of the Sensor Pad facing up.

The Bebesounds Movement Sensor will give you the peace of mind you won't get from just a sound monitor or even a video monitor.

And, this monitor is an excellent value. It is 2 monitors in 1 so you don't have to purchase a sound monitor.

The Angelcare Movement Sensor with Sound Monitor can only be used to monitor one baby at a time. If you have twins you will need to purchase 2 complete units. Please remember that the babies will have to sleep in separate cribs for these monitors to work properly. You will not be able to use Angelcare for more than 2 babies at a time because the monitor only has 2 channels.

The Movement Sensor with Sound Monitor includes an under-the-mattress Sensor Pad, a Nursery Unit, a Parents' Unit (sound monitor) and two AC adapters. It can also operate with 8 AAA batteries (not included).

**Want to listen for your baby in more than one area?  This unit is available with 2 parent's units (receivers) for an addition $20.00.  Very handy is you have an upstairs, basement, or a garage.  You should see this option below. 

Testimonials

Frequently Asked Questions

Q. What happens if my baby rolls off the Sensor Pad?
A. If the Sensor Pad does not detect your baby, it will send an alarm signal to the Nursery Unit. All you need to do is reposition her over the pad or increase the sensitivity of the pad.

Q. Will this work with any crib?
A. Yes. The only requirement is that your crib must have a hard flat surface that doesn't move. If it does not, just place a piece of masonite or a board under the mattress and place the Sensor Pad on top of the masonite and under the mattress.

Q. Will it only work in a crib?
A. No. It will work on any hard flat surface.

Q. What is the range of the Sound Monitor?
A. The Sound Monitor works from up to 200 feet away.

Q. What is the frequency of the Sound Monitor?
A. 49 MHz

 

 

Price: $79.99 $59.99

• Tell a Friend